|Goodyear technology can aid in fuel savings and CO2 reductions; potential to improve performance and eliminate need for external inflation pressure intervention
Over the past year, researchers at The Goodyear Tyre & Rubber Company have been working on a new Air Maintenance Technology application that can aid in fuel savings and CO2 reductions while potentially improving performance and eliminating need for external inflation pressure intervention. The commercial application of Goodyear’s Air Maintenance Technology will make its debut at the 2012 IAA Commercial Vehicle Show in Hanover, Germany, on stand B22 in Hall 12 from September 20 to 27.
Goodyear’s Air Maintenance Technology mechanism allows tyres to maintain constant, optimum pressure without the use of external pumps, electronics and driver intervention. Proper tyre inflation can result in improved fuel economy, prolonged tread life and improved tyre performance. Customers should receive the following key benefits from Air Maintenance Technology-enabled tyres:
Improved Fuel Economy
Proper tyre inflation is key in the commercial market. It is estimated that for every 0.5 bar (50 kPa) lost in tyre inflation, there is a 1 percent loss in km per liter.
Prolonged Tread Life
AMT is expected to play a major role in prolonging tread life in the commercial tyre market. Tyres which are 10 percent under-inflated decrease tread life by 9-16 percent . By utilizing Goodyear’s Air Maintenance Technology, commercial vehicle fleet operators will be able to realize the full mileage potential of their tyres.
Tyre-related costs are the single largest maintenance item for commercial vehicle fleet operators with nearly 50 percent of all truck and trailer breakdowns involving a tyre in some way .
Commercial trucks pose a different challenge for AMT as tyres are larger, have higher inflation pressures, drive longer distances and carry much heavier loads. Commercial tyres operate at a higher air pressure, typically 850 kPa for commercial tyres vs. 250 kPa for consumer tyres. This is a much more challenging performance requirement for the pump system. The life of a commercial truck tyre is often extended by retreading. The commercial truck AMT system is being designed to perform after the retreading process.
“We believe the Air Maintenance Technology application for commercial vehicle tyres will not only enhance the performance of the tyre, but will also provide cost savings to fleet owners and operators through the extension of tyre tread life and increased fuel economy” stated Goodyear’s Chief Technical Officer, Jean-Claude Kihn. “The progress we continue to make with this technology is very encouraging. We look forward to further testing of this concept.”
Engineers at Goodyear’s Innovation Center in Akron, Ohio, USA are credited with the development of the commercial application of this concept and the supporting technology. Prototype tyres have been produced in Goodyear’s Topeka manufacturing plant in Kansas, USA, and rigorous validation testing has confirmed that the AMT pumping mechanism works. Next year, an extensive fleet trial is planned to gather real-world information from customers.
A $1.5 million grant from The United States Department of Energy’s Office (DOE) of Vehicle Technology is helping speed up research, development and demonstration of the AMT system for commercial vehicle tyres. A grant from the Luxembourg government for research and development will continue to help fund Goodyear’s efforts in researching and developing the AMT system for consumer tyres.